RockspaceWiFi Extender Firmware Update Failed [Updated 2024]

For a smoother WiFi extender performance, your device should be updated by getting connected to Rockspace_ext. Otherwise, you are bound to experience several issues. However, in some cases, performing Rockspace WiFi extender firmware updates is not so seamless. Plenty of issues arise that could lead to WiFi extender firmware update failed error. If you also faced the same message, this article is just for you. So, go through the following points and grasp every pint of knowledge related to your issue.

You are going to know about the reasons behind the firmware update failure for your Rockspace WiFi extender. A few changes might require you to access the Rockspace WiFi extender setup wizard. So, keep your Rockspace WiFi extender login details handy. Read on.

Rockspace WiFi Extender Firmware Update Failed [Fixed]

Here are the topmost fixes that will surely help you overcome with Rockspace WiFi extender firmware update failed issue right from the comfort of your home.

Wrong Rockspace WiFi Extender Firmware Update Instructions

When you update the firmware of your range extender, you have to get through numerous instructions. Some are simple, but, some require deeper insight. Perhaps, you have followed instructions incorrectly. That is why you faced Rockspace WiFi extender firmware update failed.

Therefore, you should do the update again. But this time, you need to follow the right instructions. Go as you are instructed. Otherwise, you might have to face the same error again.

Unstable Ethernet Connection

What if your Ethernet connection is loose? Did you check on both ends? No? You should. Loose Ethernet can lead to an inconsistent internet connection. Thus, you receive inconsistent internet that breaks the flow of firmware updates.

That could the reason why you are facing the error. To resolve the issue, you have to verify the cable connection. If the ends are loose, make sure you have a cable that fits perfectly.

What you have to connect?

You have to connect two devices for the Rockspace WiFi extender firmware update success:

• First, you have to connect your Rockspace extender and router

• And, the second one, you have to connect your client device (computer or laptop) to the Rockspace extender.

You don't need to have a wired connection between them (extender and router). You can also connect them wirelessly. How?

Keep your router and Rockspace WiFi extender within reach of each other. Then, press the WPS button on your router and then on your range extender.

Then, power on your PC or laptop, navigate to the WiFi settings, then locate the extender’s default SSID, Rockspace_ext, once found, connect with it using the WiFi password.

WiFi Interference

Interference could be a contributing factor in the Rockspace WiFi extender firmware update failure. WiFi interference can happen because of the wrong placement. Furthermore, the presence of electronic devices around your extender can lead to numerous issues.

Hence, we would recommend that you choose the right location for repeater placement. Make sure your device gets plenty of space to freely transmit WiFi signals.

WiFi Devices Placed too Far

Maybe, the WiFi devices are way too far from each other. That is, the Rockspace WiFi extender is put out of the range of the host router. In that case, you won’t receive any WiFi signals that will update the firmware of your device. Rather, you are going to face a firmware update failed issue.

So, pick up your Rockspace WiFi extender and move it a little closer to your internet router. Don’t place it too close by the router. If you do, there could be a clash in wireless signals and frequencies.

Incompatible Firmware Version

Do you manually update the firmware of your Rockspace WiFi extender? If so, the chances are more that you might download the wrong firmware update. Or, the firmware could be outdated for your current Rockspace model.

Hence, having an incompatible firmware version means you are going to face a Rockspace WiFi extender firmware update failed error. Thus, you must download the correct firmware version only. More than that, you need to choose the right version for your model. You can check that by accessing the extender’s firmware update page re.rockspace.local web address (default).

Restart the Rockspace WiFi Extender

In some cases, no matter how hard you try, things don’t just fit in the right space. Rather, they just turn messier. If you have been going through the same thing, you need to restart your Rockspace WiFi extender.

Rebooting flushes out unwanted errors or bugs resulting in the error you have been facing. So, remove different devices connected to your home WiFi connection. After that, get the device off the power socket and keep it aside for some time.

Wrap Up

As you can see, many reasons are there resulting in the Rockspace WiFi extender firmware update failure. Make sure you resolve these things so that you can have a seamless firmware update.